skip to Main Content

Scenario: You are a consulting engineer working under contract to an owner on a

Scenario: You are a consulting engineer working under contract to an owner on a new solid waste transfer station project.  You completed the design several weeks ago and the constructor (a local contractor) was selected through  a competitive bid process.  The constructor is now transmitting shop drawings and other submittals to the engineer for review, as required by the construction documents. Assignment: The constructor has submitted a shop drawing for the fencing portion of the project for your approval before…

Lab – field test soil  1) Collect soil sample – below top soil- give brief expla

Lab – field test soil  1) Collect soil sample – below top soil- give brief explanation of the characteristics of the soil as you look at it and feeling it. 2) Complete a Dry strength test – write the results. 3) Complete a toughness test- write the results. 4) Complete a shaking test - write the results Write it in word 1 and half page double space. Due after, 24 hours.

Lab – Saturation Test 1) 2 clear plastic cups with holes in the bottom of each c

Lab – Saturation Test 1) 2 clear plastic cups with holes in the bottom of each cup. 2) Fill cup #1 with topsoil 3) Fill cup # 2 with less than ½ rock. Example, small marble, small rock, then fill the other half with topsoil. Also push both cups from the top to about 1 inch from the top. 4) Make hypothesis in how you feel about the drainage and saturation. 5) Pour water to saturation in both cups 6)…

The homework should be formatted as an ESSAY, (NOT AS A RESPONSE TO EACH QUESTIO

The homework should be formatted as an ESSAY, (NOT AS A RESPONSE TO EACH QUESTION). In formatting your essay, you should use the Issue, Rule, Analysis, Conclusion (IRAC) method ATTACHED BELOW.  You must make full use of the facts, expert testimony and relevant law, including specifically using the "but-for" test.     Questions and order they should be addressed in your essay response: What is the soil engineer’s general professional duty of care?  State fully the specific professional standard of care…

Read the facts below to answer the following questions:  – State the professiona

Read the facts below to answer the following questions:  - State the professional duty of care of a professional electronics design engineer, then the specific professional standard of care Magoo and Bord must follow in designing the requested product.  State the general duty of care for a corporation as to visitors on its premises and the specific standard of care relative to test areas and visitors. - Determine, using facts and law, whether anyone breached a standard of care. -…

submit a summary of an article or news report about something to do with the con

submit a summary of an article or news report about something to do with the construction industry.  Consult professional journals (Concrete Construction, Concrete Products, Asphalt Journal, Asphalt Magazine, etc.),  web sites (NRMCA, PCA, CalCIMA, Asphalt Institute, etc.), newspapers, magazines (ENR), or individual corporation web sites for news and articles on projects, materials, or processes that sound interesting to you. Organize your summary to include: 1. Title, author, and date of article. 2. A brief summary of the article in your…

Assignment-1: Prepare a research paper about both of the Construction Systems: “

Assignment-1: Prepare a research paper about both of the Construction Systems: "Mechanized (5: Lift slab, push-up, vertical & horizontal slip forms, tunnel, forms, tilt-up" and the "Pre-fabricated (3: Linear, panel & slab, box units)". The given task should be submitted as a pdf file via email, presenting an adequate description for each system, supported with clear illustration. The submission due date is 21, Sep., 2020

Assignment-1: Prepare a research paper about both of the Construction Systems: “

Assignment-1: Prepare a research paper about both of the Construction Systems: "Mechanized (5: Lift slab, push-up, vertical & horizontal slip forms, tunnel, forms, tilt-up" and the "Pre-fabricated (3: Linear, panel & slab, box units)". The given task should be submitted as a pdf file via email, presenting an adequate description for each system, supported with clear illustration. The submission due date is 21, Sep., 2020

Include a paragraph or two summarizing the key points of the case. Answer the fo

Include a paragraph or two summarizing the key points of the case. Answer the following questions: 1. Who is part of the project management team? What is the role of the different committees? What is the role of the TSO manager? 2. Who are the key stakeholders? What are each stakeholder's objectives and interests in reference to this project? What has to be done to bring them in the "same" project? 3. Evaluate the risks of each option using the…